+91-782-7649-429

Condensate Treatment Chemicals
In Qatar


Condensate Treatment Chemical is a liquid blend of neutralising amines applied for the protection of steam and condensate pipework.it is a neutralising type corrosion inhibitor for the use in steam and steam condensate systems The dosage of Condensate Treatment required for regular treatment will depend primarily upon the carbon dioxide content of the condensate.

 

Typical dose rate is 10mls/tone steam. It should be injected on a continuous basis to maintain the pH of the condensate at the main condensate pump discharge of 8.5 ā€“ 9.2 or to maintain a ā€œpā€ alkalinity of 4-8ppm. Condensate treatment may be dosed neat or diluted with cooled condensate or distilled water. It should never be fed to the surface of hot water in a boiler feed tank, but should be fed below the surface.

 

 

Features:

  • Provides effective protection of steam & condensate systems against corrosive attack by carbon dioxide & other acidic gases.
  • Reduces pickup of iron and copper in condensate as a result of corrosion suppression reliability.

 

Benefits:

  • Extends the life of steam and condensate systems giving reducing maintenance costs and less down time.
  • Using it with an oxygen scavenger gives a balanced control programme for increased plant reliability.

 

Physical Properties:

 

Form

Liquid

Colour

Light Green

pH

12.0

Density

0.98 kg/lit

Freezing Point

-8C

Flash Point

57C

Materials Compatibility

; Stainless Steel, Polyethylene, Polypropylene, Teflon.

Not Compatible

Aluminium, Copper, Brass, Fiberglass, Galvanised Steel (Zinc), Viton, Hypalon.