+91-782-7649-429

Filtron-Decol-102
In Russia


Filtron-Decol-102, This product is a quaternary ammonium cationic polymer. If you use our water decoloring agent,Must can decrease the dosage of the PAC,and decrease the sludge quantity in Russia.
 
Application:
1. It is mainly used for waste water treatment for textile, printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
3. It also can be used in the production process of paper & pulp as retention agent.
 
Advantage:
1.Strong decolorization
2.COD remove better(about 60%)
3.Faster sedimentation, better flocculation
4.Non-pollution(no aluminum, chlorine, heavy metal ions ect.)
 
Specifications:

Item Filtron-Decol-102
Main Components dicyandiamide formaldehyde resin
Appearance colorless or light-color sticky liquid
Dynamic viscosity (cps,20°C) 50~500
pH  (30% water solution) 2.5~5.0
Solid content % ≥ 50
Feature Color remove better (about 95%)


Note: Our product can be made upon your special request.

 
Application:
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly.    After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7~8 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride,    but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is    used earlier or afterwards depends on the flocculation test and the treatment process.
 
Package and Storage:

  • It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
  • It is packed in plastic drums with each containing 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tankor others    according to your requirements.
  • This product will appear layer after a long-term storage, but the effect will not be affected with stir.  Storage temperature: 5-30°C